Home Company News Product Buyonline Contact
Control-Dimmer 您的位置:LED lighting factory > Control-Dimmer > 详情
KEC-SZ600-DIMS

Before installing this productPlease read this manual carefully. Ensure full understanding of this specification to avoid unnecessary damage and additional costs.

Product Description

KEC-SZ600-DIM, adopt the most advanced PWM (Pulse Width Modulation) digital dimming technology, especially design for single color led strip. Adopt handheld wireless touch remote control and Wall-mounted touch panel remote control. 5 function buttons and 1 dimming ring in the center, all buttons are in the touch form, and the dimming ring has 128 levels in different brightness value. Particularly, there is a sense light in the remote control center. It shows the exactly light which been touched. As the led strip is the same. Further, there are 3 dynamic modes in the mode button, and the speed is adjustable. In order to achieve the synchronization of more lamps, RGB Amplifier can be used.

Technical Parameters

Working temperature

-20-60

Supply voltage

DC5V,12V~24V

0utput

3 channels

Connecting mode

common anode

External dimension

L91*W88*H24 mm

Packing size

L106*W106*H66 mm

Net weight

270g

Gross weight

300g

Output gray

256 levels RGB each

Output current

<8A(each channel)

Output power

12V:<288W,  24V:<576W

Frequency of RF remote control

433.9MHz

External Dimension

Controller: L91*W88*H24 mm                            Remote control: L113*W55*H22mm

                     

Wall touch panel: L86*W86*H32mm

Packing box: L106*W106*H66 mm (controller & remote control)     L89*W40*H89mm(wall panel)

                                                            

Interface Specifications

Direction for use

Ø  Connect the load wire at first, following by the power wire; Please ensure short circuit can not occur between connecting wire before you turn on the power

Ø  RF remote control 1:

This product adopts RF full touch control, with one dimming ring and 5 function buttons.

The function of each button as below:

Name of key

Instruction

Remarks

ON/OFF

ON or OFF in any time

Pause

Pause or Continue

Mode

The mode will move to next, when touch the key each time

3 modes in total.

Speed/Brightness +

The Speed/Brightness will +1, when  touch the key each time

Speed for dynamic modes, Brightness for static modes.

Speed/Brightness -

The Speed/Brightness will -1, when touch the key each time

Speed for dynamic modes, Brightness for static modes.

Color Ring

Touch any color temperature which you want

3 modes in total as below:

NO

Patterns

Remarks

1

Static 100% light

Brightness is adjustable, speed is unadjustable

2

flash

Speed is adjustable, brightness is unadjustable

3

fade

Ø  RF remote control 2:

This product adopts RF touch wall panel,, with one dimming ring and 5 function buttons.

The function of each button as below:

Name of key

Instruction

Remarks

ON/OFF

ON or OFF in any time

Pause

Pause or Continue

Mode

The mode will move to next, when touch the key each time

3 modes in total.

Speed/Brightness +

The Speed/Brightness will +1, when  touch the key each time

Speed for dynamic modes, Brightness for static modes.

Speed/Brightness -

The Speed/Brightness will -1, when touch the key each time

Speed for dynamic modes, Brightness for static modes.

Color Ring

Touch any color temperature which you want

3 modes in total as below:

NO

Patterns

Remarks

1

Static 100% light

Brightness is adjustable, speed is unadjustable

2

flash

Speed is adjustable, brightness is unadjustable

3

fade

Typical Applications

Application Circuit1:

Application Circuit2: Synchronization function with network Line

Notes

1. Supply voltage of this product is DC12V~24V, never connect to others or AC220V.

2. Lead wire should be connected correctly according to grade that connecting diagram offers.

3. This product is not to overload;

4. Warranty of this product is one year, but exclude the artificial situation of damaged or overload working.

Common Problems 

Problems

Possible cause

Solution

1.    Lamp does not light after power

Power cord is not properly connected, or there is not output switching power supply

Connect the power cord properly or replay the power

Lamp power cord is not connected or short circuit

Connected lighting power cord

2. After connecting some of the load the controller does not work

The connected load is too largeso that it has burned in some of the components of the controller

Replace parts of components or replace the controller

关于我们| 联系方式| 客户留言| 人才招聘| 友情链接
版权所有(C)2017 KECHEN LIGHTING ICP备8654712358号